Evo 350mm Brembo Rear Brake Adapter Kit
*All prices exclude GST(Tax) and will be calculated during checkout. International customers do not pay tax*
*Pictures are for illustration purposes only and may differ to your order*
STOP ON A DIME
Do you want a better Brembo rear brake upgrade than the Skyline GTR Brembo brakes for around the same costs?
- Balanced brake bias
- Incredible stopping power
- World’s biggest selection of brake pads and rotors
- Great bang for bucks
Here's what we engineered: Evo Brembo rear calipers + Alpha Omega Racing aerospace billet caliper adapters + 370z 350x20mm rotors.
Alpha Omega Brakes: R32 GTR Rear (Evo 350mm Brembo)
ABOUT THE EVO BREMBO CALIPERS
We use the excellent and cheap Brembo brake calipers from the Mitsubishi Lancer Evolution 5, 6, 7, 8 and 9 (they are all the same) – newer in both design and age it also features dual bleed nipples, quick pad changes and the all important dust boots... unless you like dirt grinding down your pistons or having to do frequent rebuilds.
They are also larger and more rigid which all add up to give 'more' braking, better feel, better modulation and ultimately better control on the limit. Parts are everywhere so your choices are virtually endless!
Standard Nissan 2 Pot Rear
ABOUT THE 350x20mm ROTORS
We chose this size rotor for an ideal brake balance bias and a bolt on fit. It's a Nissan 370z rear rotor so replacement parts are easy to get from budget friendly 1-piece to race-ready 2-piece. These are BIG to provide enormous stopping leverage and heat handling capabilities to ultimately give you incredible brakes.
Balancing brake bias required some math and rounded off to the nearest percent, our bias calculations put the “gold standard” Skyline GTR32/33/34 front and rear Brembos at 70:30. Using the front Alpha Omega Brakes (EVO 350mm Brembo) with a theoretical rear “EVO 350mm Brembo” gave us a super excellent 69:31 bias. To double check our math we turned to Google and found this page: http://www.tceperformanceproducts.com/bias-calculator
Using that calculator it also puts the standard GTR Brembo setup at 70:30 and the Alpha Omega Brakes Front and Rear (EVO 350mm Brembo) at 68:32 – a negligible 1% difference to our calcs. Here’s an interesting fact: the R34 Skyline GTR V-Spec 2 Nür / N1 models are the best production GTR34s ever made and they too have a brake bias of 68:32! It achieves this bias by using a larger rear rotor which is “coincidently” what we’ll be doing.
Thus we found ourselves a winning rotor! The Nissan 370z rear 350x20mm rotors fit the bill like a glove – cheap, fits, buy them anywhere, matches the EVO Brembo rear caliper and the bias is better than gold standard excellent! It’ll also look pretty frigging boss with big 350mm Brembo brakes all round to fill up your wheels.
Standard R34 GTR Rear
ABOUT THE ALPHA OMEGA RACING CALIPER ADAPTERS: AEROSPACE BILLET ALLOY
ALPHA OMEGA caliper adapters are 100% CNC machined billet alloy, grade 7075, T6 heat treated. The 7075-T6 alloy is commonly known as "aerospace alloy" because, as you can probably guess, it's used extensively in aircrafts for its light weight and high strength qualities. As with all bigger rotor upgrades there is approximately 3mm of pad overhang which is a small tradeoff for the larger rotor, stronger caliper adapters and just plain awesome brakes.
It was said a cost-effect rear brake upgrade couldn't be done without machining, grinding, modifying or otherwise butchering the calipers, knuckles or hubs. We say it aint so.
To solve the problem we designed a 6mm hub spacer and now everything just bolts on. This means that your wheels are pushed out 6mm which is something to keep in mind for those with tight tyre fitment. This piece spaces our the hub itself, not the rotor, so you do NOT lose wheel stud seating, stud thread engagement or handbrake shoe contact. We provide longer super high tensile 12.9 fasteners with the "silver zinc" coating too. If you would prefer no spacers then we have the Yokohama World Time Attack Edition kit available.
We make the kit right here in Australia so that you know the quality is excellent.
Alpha Omega Brakes: R34 GTR Front (Evo 350mm Brembo)
Alpha Omega Brakes: R34 GTR Rear (Evo 350mm Brembo)
FEATURES & BENEFITS
- 100% CNC machined billet 7075-T6 aerospace alloy adapters
- Full handbrake functionality
- Balanced brake bias
- Bigger calipers
- Bigger rotors
- Amazing brakes
- Made in Australia so you know it's done right
TECHNICAL / SIZE COMPARISON
All measurements are in millimeters unless otherwise specified.
|Car||Caliper Piston Sizes||Rotor Sizes||Pad Sizes||Master Cylinder Size|
300zx Z32 Turbo
350z Z33 Brembo
Skyline R32 GTST
Skyline R32 GTR (NON Brembo)
Skyline R33 GTS25T
Skyline R34 GTT
Skyline R23,R33,R34 GTR Brembo
Evo 5, 6, 7, 8, 9
ALPHA OMEGA Brakes: Rear
(Evo 350mm Brembo)
- Pair of CNC machined 7075-T6 billet aerospace alloy caliper adapters (rear left and rear right)
- Left and right CNC machined billet hub spacers for a bolt on installation
- Various high tensile bolts and high tensile washers
- Full installation instructions with pictures
You need to get the following parts to make it all work:
- Mitsubishi Lancer Evo 5, 6,7, 8 or 9 Brembo rear calipers (including pads/pins/shims/clip)
- Nissan 370z rear 350x20mm rotors
- Custom brake lines
Silvia (180SX/S13/S14/S15) drivers who want a functioning handbrake will need to use the R32/R33/R34/Z32 rear drum setup, a very common upgrade.
These are big brakes so you’ll need minimum 17" wheels. We do not keep track of what wheels fit as there are just too many different brands, models, widths, offsets, face types and style combinations. Trimming of dust shield is required. A BM57 17/16” brake master cylinder is recommended.
You specify what Nissan you drive at the end of the checkout process, that way we know what parts to ship to you.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: